Electronic devices have been used continuously by many families for a long time. Accordingly, periodic inspection of the 4 devices below is a necessary thing that homeowners should pay attention to.
Social network rooter (modem Wifi)
This is a device that operates continuously 24/7 to maintain Internet connection for the family. rooters that are overheating or slow network interruption can often occur after a long period of use. So check the device and re bounce periodically.
Technically, the router is like a miniature computer with memory and processors. When it is active for too long, the buffer memory will be full and the heat will be released large, reducing data transmission performance.
The turned off and reset (restart) action will help free up RAM, allowing the device to update IP and operate more smoothly.
This is a simple but quite effective technological trick, helping the Internet connection to be stable when working or entertaining at home.
Air conditioner
With air conditioners, after a long time of operation, the air filter is the place where the most dirt and bacteria accumulate. If you see a slow or foul air conditioner, it is a sign that the filter should be cleaned.
In terms of operating principle, the air conditioner sucks in the room, passes through the filter to cool and blow back. When the filter is covered by dust, the air flow is blocked, forcing the compressors to work at a higher capacity to reach the set temperature. Removing the filter net from the cleaner with water will help the air flow easily.
Refrigerator
A refrigerator is a large electricity consumer, and a small detail such as rubber gasoline (goods) needs to be checked regularly. Housewives can apply a small tip of clipping a piece of paper into the closet and closing it to check the closeness.
If the paper falls or is pulled out too easily, it means that the rubber gasket has lost elasticity. At that time, the cold air inside will continuously escape. The heat sensor will record the temperature deprivation and activate the compressor to run continuously to compensate. Timely detection and replacement of rubber gasoline will prevent heat leakage, helping the machine operate more durably.
" extended power supply
Checking extended power sockets is an important task to ensure fire safety. Check the holes and wires to see signs of deformation, discoloration or cracking.
Over time, the metal beams inside the plugs become loose, reducing their exposure to the plugs. This poor contact phenomenon will create local high temperatures or electrical fires (electrical lamps), and can easily heat plastic shells and cause internal fires.
